So when I ping my router, it shows 100% packet loss. Reply CM says: January 11, 2013 at 4:49 am I had problems with kernal 3 and up but finally got it with windows wireless drivers and the latest winxp 32bit drivers i am happy. I have not heard of any of the DWL-520's with the acx100 but I have heard of some of the DWL-650's (the PCMCIA version of the card) with the acx100 chip. http://infopoool.com/d-link/d-link-drivers-linux.html
It should work?>How could I know if the compilation proccess has finished properlly? The chipset of my card is "RaLink RT2561/RT61 rev B 802.11", so I thought this page could be the solution to my problems 🙂 I've followed your steps , but when All rights reserved. one wired directly to a different AP and one connected wirelessly to another AP(which I am trying to configure now and both were working simultaneously before).
Can someone plz suggest me a suitble operating system which can detect the network card. Reply nixCraft says: October 23, 2006 at 8:36 pm Hello eggmatters,Install kernel headers package for 2.6.8-2-386 kernel. It took me maybe 6 to 8 hours to figure this out the first time and after a few months, I tried again and it took me about an hour. h t t p: / / slax.hosting4p.com/modules.php?category=drivers&id=1388&name=acx100_2 0060521 i rename it it to .lmz file and put in the /BT3/Modules folder.
I'm installing a Linksys WMP54G pci card under Fedora Core 6Nico Reply nixCraft says: January 29, 2007 at 9:28 pm Hello Nico,Add auto config to /etc/rc.local file for FC6.HTH Reply Nico
Please visit this page to clear all LQ-related cookies.
This can also be done via file of course.
They (extremely stupidly) take that chipset and limit it to 11 Mbps instead of the 22/44 Mbps that it's capable of.
but no ping, no surf.
If you'd like to contribute content, let us know.
Some one at D-Link sent me the following URL on the D-Link site that links to 3rd party providers of drivers for the respective chip sets used on this card.
you didn't compile it yourself), then the kernel should have the driver already. Does not work if prism54 is blacklisted in /etc/modprobe.d/blacklist.conf So what you need to do is open this file by doing this in a terminal: gksudo gedit /etc/modprobe.d/blacklist.conf it will then Reply jono says: May 21, 2007 at 1:16 am i had the same problem as "no rt61.ko" so i used rt61.0When i try and probe the card i get"Can't locate module The error worth nothing is in /var/log/messages i get: wlan0: cannot create symlink to default keyAlso on ifup wlan0 i get SIOCSIFFLAGS: Input/output error Failed to bring up wlan0.These are many
Any suggestions. Reply Konrad says: December 16, 2006 at 7:59 pm Thanks for the guide! Yes you need to specify the key w/o which you will not get access via WL router. http://www.backtrack-linux.org/forums/showthread.php?t=7685 Having said that if you use choose ndiswrapper be sure you can get the drivers needed before you try it.
Reply nixCraft says: November 8, 2006 at 8:59 am zug,No problem. es 10.0.0.1 Reply Dan Yotz says: September 20, 2008 at 6:15 pm well if your router's ip is 10.0.0.1, that could be a problem, you must make sure that your netmask Reply nixCraft says: October 28, 2006 at 6:25 pm Heh.I am glad that it is working now. Restarted the network, then restarted the NetworkManager service and kablamo!
Update : the acx-firmware-20060207.tar.bz2 file can be downloaded here or here(down). " the link you need is h t t p : / / w w w . this contact form Following the instructions found here I managed to get my D-Link DWL-G510 working on OpenSuse 10.2. Grep: unexpected results when searching for UPPERCASE words I think that she thinks that I think she is dumb Obfuscating event location on map What home printer would allow for exact Reply Avish says: November 9, 2007 at 6:27 pm Hello there,Cheers for a wonderful webpage - was tearing hairs out until i found it a few months back.
D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX UK Jump to content Linux / Unix Support Neowin Existing user? i put those two files in /lib/firmware folder. Cheers Reply nixCraft says: August 9, 2006 at 4:47 pm systray,It is for rev b 🙂 (and i'm using rav B) Reply Pablo Medina says: September 15, 2006 at 11:30 am
dat file or in the key file that supplements the ifcfg-ra0?Sorry for the rambling post, but I'm exhausted and I'm trying to cover all the ground as concisely as possible.
This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant. Stop. It was fun, honestly, definitely a learning experience.eggmattersPS, anybody with problems with the rt61 chipset, you can now send them my way. Interface ra0 is up, but I can not ping the router.
I'm thinking this maybe part of the problem?Also, if I'm using a plain text password, which place is the correct place for the password with AES encryption using WPA2PSK authmode? I am not able to understand why is it showing wlan0. Thanx!! http://infopoool.com/d-link/d-link-dwl-650-linux-driver.html I looked under setting up a new ethernet connection and under a newwireless connection, are these the wrong places?
i understand this is beyond the scope of this forum, and i will take this up somewhere else, i just dont have any idea where to turn right now. I was trying to get working the driver for a hour ago, then i read this. User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 International License. My friend had same problem after using latest kernel his problem solved (Linuxant driver).Also make sure your driver loaded and configured perfectly .Personally I am running stable kernel and I have
I don't seem to have dos2unix and when I try to install tofrodos with apt I get a Couldn't find Package error.